블로그로 돌아가기
사용 방법 가이드 2026-11-20 B&C Camera 0 조회수

How to Use a Kupo Tethermate for Tethered Shooting

How to Use a Kupo Tethermate for Tethered Shooting

Learn how to set up the Kupo Tethermate Small for tethered shooting with a MacBook 15" or similar laptop. Covers mounting, cable management, and tripod attachment.

What the Kupo Tethermate Does

The Kupo Tethermate Small is a portable laptop platform designed for tethered shooting on location. It provides a stable surface for a MacBook 15" or similar-sized laptop, letting you review images directly from your camera while keeping your setup compact and mobile.

The 17.5" x 11.7" (445 x 286.5 mm) plate includes 1/4"-20 and 3/8"-16 female threads on its underside, which means you can mount it directly onto a tripod or any support with matching male threads. Three mounting slots under the plate let you attach additional accessories using the included U-shaped sliding plate and spring-loaded knob.

Key Specifications at a Glance

Setting Up the Tethermate for Tethered Shooting

  1. 1. Mount the Tethermate on a tripod or stand: Screw the Tethermate onto a tripod head or stand using the 1/4"-20 or 3/8"-16 female threads on its underside. Tighten securely to prevent wobble during use.
  2. 2. Place your laptop on the plate: Set your MacBook 15" or similar laptop centered on the plate. The surface is flat and non-slip enough for stable placement, but avoid overhang to keep the laptop secure.
  3. 3. Connect your camera for tethered capture: Use a compatible tether cable (USB or Thunderbolt) from your camera to the laptop. Run the cable along one of the mounting slots or use the U-shaped sliding plate to route and secure the cable.
  4. 4. Attach accessories using the sliding plate system: Insert the U-shaped sliding plate into one of the three mounting slots and tighten the spring-loaded knob. This provides a mounting point for cable clips, a small monitor, or other accessories that help manage your tether cable.
  5. 5. Adjust height and angle for comfortable viewing: Adjust your tripod or stand height so the laptop screen is at eye level. The Tethermate itself does not tilt, so you rely on the tripod head for angle adjustments.

Cable Management Tips

A tidy cable run prevents tripping and accidental disconnection during a shoot. The Tethermate's mounting slots and sliding plate make it easy to secure your tether cable close to the plate. You can also use the slots to attach a small cable tie or Velcro strap (not included) to keep the cable from dangling.

If your camera is on a separate tripod, leave enough slack in the cable to allow for small movements. Avoid sharp bends near the connectors to protect the cable and your ports.

What the Supplied Information Does Not Cover

The catalog does not specify the maximum laptop weight or the exact tripod thread length required. Ensure your tripod head has a standard 1/4"-20 or 3/8"-16 male screw and that the screw is long enough to engage the Tethermate's threads securely. For cable compatibility, check your camera's tethering requirements separately.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보