Why Use the SmallRig Power Bank Clip with Your RC 60B
The RC 60B is a capable light, but its battery life can be limiting during long shoots. The SmallRig Power Bank Clip (model 4318) is designed to extend that runtime by letting you attach a PD power bank directly to the light's yoke. This keeps the power source secure and close to the fixture, avoiding dangling cables or makeshift tape jobs.
What the SmallRig Power Bank Clip Offers
- SmallRig Powerbank Clip for RC 60B 4318: The SmallRig Power Bank Clip extends the battery life of the RC 60B while providing secure attachment for a PD power bank, compatible with various models available on the market. This clip is purpose-built for the RC 60B, so you don't have to improvise or worry about the power bank slipping off during use.
SmallRig Powerbank Clip for RC 60B 4318 - SmallRig Powerbank Clip for RC 60B 4318: Compatible with PD power banks ranging in width from 2.5 to 3.2 inches and with a thickness of less than 1.2 inches, it supports capacities from 10000mAh to 26800mAh. Knowing the size limits helps you choose a power bank that fits securely. Many common PD power banks fall within this range.
- SmallRig Powerbank Clip for RC 60B 4318: It firmly holds the PD power bank, allowing for convenient charging or powering of the RC 60B via the included USB-C to USB-C cable. The clip includes the necessary cable, so you have everything you need right out of the box.
How to Mount the Power Bank Clip to Your RC 60B
The following steps are based on the clip's design. Always refer to the full product manual for any specific torque or safety instructions.
- 1. Check Your Power Bank Compatibility: Measure the width of your PD power bank (must be between 2.5 and 3.2 inches) and its thickness (must be less than 1.2 inches). The clip supports capacities from 10000mAh to 26800mAh.
- 2. Attach the Clip to the RC 60B Yoke: Position the clip's mounting bracket over the yoke arm of the RC 60B. Tighten the securing knob or screw (as per the clip's design) until the bracket is snug but not over-tightened.
- 3. Insert the Power Bank: Slide your PD power bank into the clip's adjustable cradle. Ensure it sits flush and the retaining arms hold it firmly. The clip should grip the power bank without excessive force.
- 4. Connect the USB-C Cable: Use the included USB-C to USB-C cable to connect the power bank's output port to the RC 60B's DC input. Route the cable neatly along the yoke to avoid snagging.
- 5. Power On and Verify: Turn on the power bank and then the RC 60B. Confirm that the light is receiving power (the battery indicator or display should show external power). Adjust the clip angle if needed for balance.
Important Compatibility Notes
The clip is designed specifically for PD (Power Delivery) power banks. Non-PD banks may not deliver sufficient or stable power to the RC 60B. Also, the clip's fit depends on the yoke geometry of the RC 60B; it is not confirmed to work with other lights without modification.
The catalog does not specify the exact method for adjusting the clip's grip or whether it can be locked in a fixed position. If your power bank feels loose, double-check the width and thickness measurements. The clip is not rated for heavy vibration or outdoor use in wet conditions.
