How to Use a GoPro as a Versatile Camera Rig
By B&C Camera | Published: 2026-10-28
Category: How-to Guides
Turn your GoPro into a flexible rig with the 3-Way 2.0 grip, arm, and tripod. Learn step-by-step mounting tips and how The Tool keeps screws tight.
Quick Answer
Use the GoPro 3-Way 2.0 as a grip, tripod, or extension arm to turn your GoPro into a versatile rig for almost any shot. Add The Tool to keep thumb screws tight during high-action use.
Why the 3-Way 2.0 beats a single-purpose mount
Most GoPro mounts force you to choose between a handheld grip, a tripod, or an extension arm. The 3-Way 2.0 combines all three in one compact tool, so you can switch from a low-angle tripod shot to a follow shot without swapping gear. That makes it a practical choice for travel, vlogging, and action sequences where you need to adapt quickly.
The trade-off is that a multi-tool rarely excels at one job the way a dedicated mount might. For example, the built-in tripod is height-adjustable but not as tall as a full-size tripod, and the arm is best for selfies or follow shots rather than extreme reach. For most creators, that flexibility outweighs the limitations.
How to Set Up Your GoPro Rig
- Attach the camera to the grip: Screw your GoPro onto the 3-Way 2.0's built-in mount, ensuring the thumb screw is hand-tight. Use The Tool to give it extra torque so the camera stays secure during movement. Check that the camera doesn't wiggle before you start shooting.
- Choose your mode: grip, tripod, or arm: Hold the grip for handheld shots, unfold the legs for a tripod, or extend the arm for selfies or follow shots. Practice switching between modes so you can do it quickly on location. If you're using the tripod, make sure the legs are fully locked to avoid collapse.
- Adjust the ball joint for framing: Use the built-in ball joint to tilt or swivel the camera 360° for the perfect angle. Tighten the joint firmly to hold the position, but avoid over-tightening. After adjusting, do a quick test shot to confirm the framing is stable.
Gear That Makes the Rig Work
- GoPro 3-Way 2.0 (Grip/Arm/Tripod): 3-Way 2.0 is three essential tools in one ultra versatile mount: an ergonomic camera grip, a height-adjustable tripod, and an extension arm for selfies or follow shots. You can adapt your GoPro to different shooting situations without carrying extra equipment, making it a core piece of a versatile rig.
GoPro 3-Way 2.0 (Grip/Arm/Tripod) - GoPro The Tool - Thumb Screw Wrench and Bottle Opener: The Tool is a GoPro thumb screw wrench that doubles as a bottle opener, designed to tighten thumb screws for high-speed, high-vibration activities. It helps prevent your camera from shifting during action shots, so you get stable footage even when you're moving fast.
GoPro The Tool - Thumb Screw Wrench and Bottle Opener
Once your rig is set up, experiment with different modes to find the best angles for your shots. Keep The Tool handy for quick adjustments on the go.
